Mr. Steam Steam@Home Series Shower Generator Package
Mr.Steam SAH3000
Steam@Home Series 3kW Steam Shower Generator Package
On/off control and steam head included! The Mr Steam SAH3000 3kW home steam shower generator package is engineered for use in home steam baths with dimensions up to 75 adjusted cubic feet (ACF). Made in U.S.A.
FEATURES:
SAH3000 Generator
- Unitized stainless steel reservoir
- Durable electronic components
- Electronic water-level control system
- Stainless steel design inside and out
- Low voltage safety control circuits
- Built in 24-volt circuit
- ASME safety valve
- Full port drain valve
- UL/CSA/CE listed
SteamStart Control
- On/Off operation
- 20-Minute run cycle non-adjustable
- Low profile
- Polished Chrome trim
- Inside/outside the steam/shower enclosure installation
- Low voltage operation
Cool-to-the-Touch Steamhead
- Quieter operation
- Integral reservoir for a scented steam bath
- Low profile and sleek design
- Polished Chrome finish
Acrylic Shield
- Clear Lexan construction, 1/8” thick, transparent look
- Measures 4-3/8" in diameter and is 1/2" deep
- Integral, 1-5/8” diameter mounting hole
INCLUDES:
- 3.0KW Steam bath generator
- SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
- 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
- Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
- Acrylic shield, 4-3/8" diameter, 1/2" deep
- RTV silicone sealant, .5 ounce tube
- Installation and operation manual
- Limited warranty
SPECIFICATIONS:
Model | SAH3000 |
---|---|
Maximum Adjusted Cubic Feet | 65 |
Kilowatt Rating (KW) | 3.0 KW |
Shipping Weight | 25 lbs |
Electrical Specifications | (refer to Electrical chart) |
Water Supply Connection | 3/8" NPT |
Generator Steam Line Connection | 3/8" NPT |
Steam Head Connection | 1/2" NPT |
Drain Connection | 1/4" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 7/8" Diameter |
Generator Control Connection | 3-Pin, Plug-In Connector |
Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
Width | 14-3/8" |
Depth | 5-3/16" |
Height | 14-7/8" |
Adjustable Time | No |
Session Timing | 20 minutes |
Mr.Steam SAH4500
Steam@Home Series 4.5kW Steam Shower Generator Package
On/off control and steam head inicluded! The Mr. Steam SAH4500 4.5kW steam shower generator package is engineered for home steam rooms from 76 to 110 adjusted cubic feet (ACF). Made in U.S.A.
FEATURES:
SAH4500 Generator
- Unitized stainless steel reservoir
- Durable electronic components
- Electronic water-level control system
- Stainless steel design inside and out
- Low voltage safety control circuits
- Built in 24-volt circuit
- ASME safety valve
- Full port drain valve
- UL/CSA/CE listed
SteamStart Control
- On/Off operation
- 20-Minute run cycle non-adjustable
- Low profile
- Polished Chrome trim
- Inside/outside the steam/shower enclosure installation
- Low voltage operation
Cool-to-the-Touch Steamhead
- Quieter operation
- Integral reservoir for a scented steam bath
- Low profile and sleek design
- Polished Chrome finish
Acrylic Shield
- Clear Lexan construction, 1/8” thick, transparent look
- Measures 4-3/8" in diameter and is 1/2" deep
- Integral, 1-5/8” diameter mounting hole
INCLUDES:
- 4.5KW Steam bath generator
- SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
- 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
- Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
- Acrylic shield, 4-3/8" diameter, 1/2" deep
- RTV silicone sealant, .5 ounce tube
- Installation and operation manual
- Limited warranty
SPECIFICATIONS:
Model | SAH4500 |
---|---|
Maximum Adjusted Cubic Feet | 100 |
Kilowatt Rating (KW) | 4.5 KW |
Shipping Weight (Lbs.) | 25 lbs |
Electrical Specifications | (refer to Electrical chart) |
Water Supply Connection | 3/8" NPT |
Generator Steam Line Connection | 3/8" NPT |
Steam Head Connection | 1/2" NPT |
Drain Connection | 1/4" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Generator Control Connection | 3-Pin, Plug-In Connector |
Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
Width | 14-3/8" |
Depth | 5-3/16" |
Height | 14-7/8" |
Adjustable Timer | No |
Session Timing | 20 minutes |
Mr.Steam SAH6000
Steam@Home Series 6kW Steam Shower Generator Package
All-inclusive package with 6kW steam generator, power control, steam head with aroma reservoir, and built-in drain valve! The 6kW Mr. Steam Steam at Home 6000 steam shower generator package is engineered for home steam rooms with dimensions from 111 to 150 adjusted cubic feet (ACF). Top quality and American-made at an affordable price!
FEATURES:
SAH6000 Generator
- Unitized stainless steel reservoir
- Durable electronic components
- Electronic water-level control system
- Stainless steel design inside and out
- Low voltage safety control circuits
- Built in 24-volt circuit
- ASME safety valve
- Full port drain valve
- UL/CSA/CE listed
SteamStart Control
- On/Off operation
- 20-Minute run cycle non-adjustable
- Low profile
- Polished Chrome trim
- Inside/outside the steam/shower enclosure installation
- Low voltage operation
Cool-to-the-Touch Steamhead
- Quieter operation
- Integral reservoir for a scented steam bath
- Low profile and sleek design
- Polished Chrome finish
Acrylic Shield
- Clear Lexan construction, 1/8” thick, transparent look
- Measures 4-3/8" in diameter and is 1/2" deep
- Integral, 1-5/8” diameter mounting hole
INCLUDES:
- 6.0KW Steam bath generator
- SteamStart surface-mounted control, 1-1/2” diameter, 1/8” deep
- 3-Pin Control cable, 30’ long, hard-wired to control with plug-in connector
- Cool-to-the-Touch steamhead, 1/2” NPT, 3-1/16” diameter, 1-13/16” deep
- Acrylic shield, 4-3/8" diameter, 1/2" deep
- RTV silicone sealant, .5 ounce tube
- Installation and operation manual
- Limited warranty
SPECIFICATIONS:
Model | SAH6000 |
---|---|
Maximum Adjusted Cubic Feet | 150 |
Kilowatt Rating (KW) | 6.0 KW |
Shipping Weight | 25 lbs |
Electrical Specifications | (refer to Electrical chart) |
Water Supply Connection | 3/8" NPT |
Generator Steam Line Connection | 3/8" NPT |
Steam Head Connection | 1/2" NPT |
Drain Connection | 1/4" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 7/8" Diameter |
Generator Control Connection | 3-Pin, Plug-In Connector |
Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
Width | 14-3/8" |
Depth | 5-3/16" |
Height | 14-7/8" |
Adjustable Time | No |
Session Timing | 20 minutes |